Click image to view full size image
Topless Tower Crane QTZ80P(PT5613)
1. The main stressed steel parts of QTZ80P(PT5613) topless tower crane use Q345B steel, size of mast section is 2m*2m*2.8m, splited mast section can save transportation fee.
2. Light weight, small air resistance, convenient transportation, slewing applies double slewing mechanisms, hoisting mechanism uses double-speed wound motors, run smoothly.
Properties and merits of Topless tower crane QTZ80P(PT5613):
1. Advanced manufacturing technique and quality management.
2. High working efficiency, great speed
| Topless Tower Crane QTZ80P(PT5613) | |||
| Rated lifting moment | KN. M | 800 | |
| Max. lifting load | T | 8 | |
| Working radius | M | 3~56 | |
| Tip load | T | 1.3 | |
| Hositing height | Independent | M M | 45 150 |
| Attached | |||
| Hositing speed | 2 falls | M/MIN | 80/40/10 |
| 4 falls | M/MIN | 40/20/5 | |
| Trolleying speed | M/MIN | 22/44 | |
| Slewing speed | R/MIN | 0.7 | |
| Climbing speed | M/MIN | 0.6 | |
| Structure self-weight | T | 45 | |
| Total installed capacity | KW | 43.5 | |
| Balance weight | T | 11.82 | |
| Working temperature | º C | -20~40 | |
| Working voltage | V | 380± %5 | |
| Max working wind pressure | N/M2 | 250 | |
Topless Tower Crane QTZ80P (PT5613) max load 8t-nicolemiao@crane2.com
